Hyundai Azera: Hood Assembly Components and Components Location

Repair procedures

Adjustment 1. After loosening the hinge (A) mounting bolt, adjust the hood (B) by moving it up or down, or right or left. 2. Adjust the hood height by turning the hood overslam bumpers (C). ...

Hood Assembly Repair procedures

Replacement     • When removing and installing the hood, an assistant is necessary. • Be careful not to damage the hood and body. • When removing the clips, u ...

See also:

Underdrive Brake Control Solenoid Valve(UD/B_VFS) Schematic Diagrams
Circuit Diagram ...

Removable towing hook (front, if equipped)
1. Open the trunk, and remove the towing hook from the tool case. 2. Remove the hole cover pressing the lower part of the cover on the front bumper. 3. Install the towing hook by turning it clockw ...

Wheel Repair procedures
Lug nut tightening sequence Tighten the hub nuts as follows. Tightening torque: 88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)     When using an impact gun, final tigh ...