Hyundai Azera: Hood Latch Release Handle Components and Components Location

Hood Weatherstrip Repair procedures

Replacement 1. Remove the hood weatherstrip (A). 2. Installation is the reverse of removal. ...

Hood Latch Release Handle Repair procedures

Replacement 1. Using a screwdriver or remover, remove the hood release handle (A).     • Use a 6mm hex bit to press the center until the handle easily pulls off the post. ...

See also:

Rear Curtain Switch Repair procedures
Removal 1. Disconnect the negative(-) battery terminal. 2. Remove the floor console upper cover. (Refer to Body - "Floor Console Assembly") 3. Remove the rear curtain switch connector (A) ...

Transaxle Oil Temperature Sensor Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Disconnect the solenoid valve connector. 3. Measure resistance between sensor signal terminal and sensor ground terminal. 4. Check that the ...

To defog inside windshield
1. Set the fan speed to the desired position. 2. Select desired temperature. 3. Press the defroster button (). 4. The air conditioning will be turned on according to the detected ambient temperat ...