If necessary, to keep the lights on when the engine is turned off, perform the following:
1) Open the driver-side door.
2) Turn the parking lights OFF and ON again using the light switch on the steering
column.
CAUTION
If the driver gets out of the vehicle through other doors, the battery saver function does not operate. Therefore, it causes the battery to be discharged. In this case, make sure to turn off the lamp before getting out of the vehicle.
SRS Control Module (SRSCM) Description and Operation
Description
The primary purpose of the SRSCM (Supplemental Restraints
System Control Module) is to discriminate between an event that warrants
restraint system deployment and an event that does ...
Heated Oxygen Sensor (HO2S) Specifications
Specification
[Bank 1 / sensor 2, Bank 2 / sensor 2]
A/F Ratio (?)Output Voltage(V)RICHMin. 0.8LEANMax. 0.1
ItemSpecificationHeater Resistance (?)3.3 ~ 4.1[20°C(68°F)]
[Bank 1 / sensor 1, ...
Automatic heating and air conditioning
1. Push the AUTO button.
The modes, fan speeds, air intake and air-conditioning will be controlled automatically
by setting the temperature.
2. Set the temperature to the desired temperatur ...