Hyundai Azera: Front Muffler Components and Components Location

Exhaust Manifold Repair procedures

Removal and Installation [LH] 1. Disconnect the LH front and rear heated oxygen sensor (HO2S) connector. (Refer to Fuel System - "Heated Oxygen Sensor (HO2S)") 2. Remove the front muffler ...

Front Muffler Repair procedures

Removal and Installation 1. Disconnect the battery negative terminal. 2. Remove the engine room under cover. 3. Disconnect the heated oxygen sensor (HO2S) connector. (Refer to Fuel Sys ...

See also:

Front Seat Shield Inner Cover Components and Components Location
Component Location 1. Front seat shield inner cover ...

Tire traction
Tire traction can be reduced if you drive on worn tires, tires that are improperly inflated or on slippery road surfaces. Tires should be replaced when tread wear indicators appear. To reduce the po ...

Closing the fuel filler lid
1. To install the cap, turn it clockwise until it clicks one time. This indicates that the cap is securely tightened. 2. Close the fuel filler lid and push it lightly and make sure that it is secure ...