Specification |
Pressure [kPa (kgf/cm?, psi)] | Output Voltage (V) |
-6.67 (-0.06, -0.97) | 0.5 |
0 | 2.5 |
+6.67 (0.068, 0.97) | 4.5 |
Hood Insulator Pad Repair procedures
Replacement
1.
Using a clip remover, detach the clips, and remove the hood insulator pad (A).
•
Be careful not to scratch the hood panel.
2.
Installation is the ...
Rear curtain (if equipped)
To fold the rear curtain, press the button. To unfold the rear curtain, press
the button again.
CAUTION
Do not pull or fold the rear curtain by hand. It could cause motor failure.
The rear ...
Heater Unit Repair procedures
Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Recover the refrigerant with a recovery/ recycling/ charging station.
3.
When the engine is cool, drain the engine coola ...