Hyundai Azera: Hood

Power windows

The ignition switch must be in the ON position for power windows to operate. Each door has a power window switch that controls the door's window. The driver’s door has a master power window swit ...

Opening the hood

Open the hood after turning off the engine on a flat surface, move the shift lever to the P(Park) position and set the parking brake. 1. Pull the release lever to unlatch the hood. The hood shou ...

See also:

Smart key receiver Repair procedures
Removal RF Receiver     - Take care not to scratch the crash pad and related parts 1. Disconnect the negative(-) battery terminal. 2. Remove the rear seat. (Refer to ...

A/C Pressure Transducer Components and Components Location
Component Location ...

Line Pressure Control Solenoid Valve Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Disconnect the solenoid valve connector. 3. Measure resistance between sensor signal terminal and sensor ground terminal. 4. Check that the ...