Hyundai Equus Manuals

Hyundai Azera: Fuel Pressure Regulator Repair procedures - Fuel Delivery System - Engine Control/Fuel System - Hyundai Azera 2011-2026 Service ManualHyundai Azera: Fuel Pressure Regulator Repair procedures

Removal
1.
Remove the fuel pump.
(Refer to Fuel Delivery System - “Fuel Pump”)
2.
Disconnect the electric pump wiring connector (A) and the fuel sender connector (B).

3.
Remove the cushion pipe fixing clip (A), and then separate the head assembly (B) from reservoir cup.

4.
Remove the return nozzle (B) after releasing the fixing hook (A).

5.
Remove the reservoir-cup (B) after releasing the fixing hooks (A).

6.
Remove the pre-filter (C) after releasing the fixing hooks (A,B)

   
Be careful of O-ring.
7.
Remove the fuel pressure regulator (A) in the direction.

Installation
1.
Installation is reverse of removal.
Fuel Sensor Repair procedures
Removal 1. Remove the fuel pump. (Refer to Fuel Delivery System - “Fuel Pump”) 2. Disconnect the fuel sender connector (A). 3. Remove the fuel sender (A) after releasing the fix hook ...

Fuel Line Repair procedures
Removal     In case of removing the high pressure fuel pump, high pressure fuel pipe, delivery pipe, and injector, there may be injury caused by leakage of the high pressure f ...

See also:

Closing the trunk
To close, lower the trunk lid, then press down on it until it locks. To be sure the trunk lid is securely fastened, always check by trying to pull it up again. Once the trunk is opened and then clos ...

Cluster Fascia Panel Components and Components Location
Component Location 1. Cluster fascia panel ...

Heated Oxygen Sensor (HO2S) Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the HO2S connector. 3. Measure resistance between the HO2S terminals 3 and 4. 4. Check that the resistance is within the speci ...

Categories

Hyundai Azera Manuals

2011-2026 Copyright www.hgmanual.com