Hyundai Azera: Keep your garage dry
Fifth generation HG (2011–2026) / Hyundai Azera 2011-2026 Owners Manual / Maintenance / Appearance care / Keep your garage dry
Do not park your vehicle in a damp, poorly ventilated garage. This creates a favorable environment for corrosion.
This is particularly true if you wash your vehicle in the garage or drive it into the garage when it is still wet or covered with snow, ice or mud. Even a heated garage can contribute to corrosion unless it is well ventilated so moisture is dispersed.
Exterior care
Exterior general caution
It is very important to follow the label directions when using any chemical cleaner
or polish. Read all warning and caution statements that appear on the label.
Finish main ...
Keep paint and trim in good condition
Scratches or chips in the finish should be covered with "touch-up" paint as soon
as possible to reduce the possibility of corrosion. If bare metal is showing through,
the attention of a qu ...
See also:
35R Clutch Control Solenoid Valve(35R/C_VFS) Specifications
Specifications
Direct control VFS[35R/C]
? Control type : Normal low type
Control Pressure [kpa (kgf/cm?, psi)]500.14 ~ 9.81(5.1~ 0.1, 72.54 ~ 1.42)Current value(mA)50 ~ 850 Internal resi ...
Rear Bumper Cover Repair procedures
Replacement
•
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
•
Take care not to bend or scratch the trim and ...
Front Wheel Speed Sensor Repair procedures
Removal
1.
Remove the front wheel and tire.
Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
2.
Remove the front wheel speed sensor mounting bolt (A).
Tighten ...
Categories
Hyundai Azera Manuals
