Hyundai Azera: Lane Departure Warning System (LDWS) Unit Components and Components Location

Repair procedures

Service Point Target Auto Calibration (SPTAC) This procedure provides a way to calibrate the camera by having the service technician align the car to a well lit simulated straight road target; ...

Lane Departure Warning System (LDWS) Unit Repair procedures

Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the LDWS unit cover (A). 3. Disconnect the LDWS unit connector (A). 4. Remove the LDWS unit after disengaging the mou ...

See also:

Accelerator Position Sensor (APS) Repair procedures
Inspection 1. Connect the GDS on the Data Link Connector (DLC). 2. Turn the ignition switch ON. 3. Measure the output voltage of the APS 1 and 2 at C.T and W.O.T. Specification: Refer t ...

Tire specification and pressure label
The tires supplied on your new vehicle are chosen to provide the best performance for normal driving. The tire label located on the driver's side center pillar gives the tire pressures recomm ...

Pairing through [PHONE] Setup
Press the key  Select [Phone] Select [Pair Phone] Select   TUNE knob 1.The following steps are the same as those described in the section "When No Devices have been Paired&qu ...