Hyundai Azera: Rear Door Module Components and Components Location

Rear Door Window Glass Repair procedures

Replacement 1. Remove the rear door trim. (Refer to Rear Door - "Rear Door Trim") 2. After loosening the mounting screws, then remove the rear door frame rear garnish (A). 3. Loosen the r ...

Rear Door Module Repair procedures

Replacement 1. Remove the rear door window glass. (Refer to Rear Door - "Rear Door Window Glass") 2. Remove the rear door outside handle. (Refer to Rear Door - "Rear Door Outside Handle") ...

See also:

Repair procedures
Inspection (With GDS) 1. Check BCM input/output specification of multifunction switch using the GDS. If the specification is abnormal, replace the lamp or wiper switch. 2. If diagnosis is ...

Water Pipe Repair procedures
Removal and Installation 1. Remove the delivery pipe and injector assembly. (Refer to Fuel System - "Delivery Pipe") 2. Remove the water temperature control assembly. (Refer to Cooling Sys ...

Rear Back Armrest Cup Holder Repair procedures
Replacement     • Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface. • Take care not to bend or scratch the trim and ...