Canister Close Valve (CCV) Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the CCV connector.
3.
Measure resistance between the CCV terminal 1 and 2.
4.
Check that the resistance is within the specific ...
In-car sensor Description and Operation
Description
1.
In-car air temperature sensor is located at the lower crash pad.
2.
The sensor contains a thermistor which measures the
temperature of the cabin. The signal, determined by the ...
Headlight (Headlamp) welcome function
When the headlight is in the ON or AUTO position and all doors (and trunk) are
closed and locked, if you press the door unlock button on the smart key, the headlights
(and/or parking light) will com ...