Hyundai Azera: Tire Pressure Monitoring System
Alignment Repair procedures
Components and Components LocationKnock Sensor (KS) Repair procedures
Removal
[Knock Sensor #1 (Bank 1)]
1.
Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2.
Disconnect the knock sensor connector (A).
3.
Remove the intake man ...
1. Crankcase emission control system
The positive crankcase ventilation system is employed to prevent air pollution
caused by blow-by gases being emitted from the crankcase.
This system supplies fresh filtered air to the crankcase thro ...
Smart Cruise Control Unit Repair procedures
Removal
1.
Remove the bumper.
(Refer to Body - "Front Bumper Cover")
2.
Loosen the bolts and nuts and then remove the smart cruise control unit assembly (A) from the vehicle.
3.
Disconn ...