Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the luggage room lamp (B) when prying the clip (A) with a flat-up screwdriver. |
3. |
Remove the luggage room lamp bulb in case of necessity. |
Installation |
1. |
Install the luggage room lamp assembly after connecting the lamp connector. |
TJ Joint Components and Components Location
Components
[LH]
1. BJ assembly2. Circlip3. BJ boot band4. BJ boot 5. Dynamic damper band6. Dynamic damper7. Shaft8. TJ boot band 9. TJ boot10. Spider assembly11. Snap ring12. TJ case 13. Circl ...
Automatic Transaxle Components and Components Location
Components Location
1. Converter housing2. Automatic transaxle case3. Rear cover4. Valve body cover5. Manual control lever6. Air breather hose7. Inhibitor switch8. Solenoid valve connector
...
Cluster ionizer Repair procedures
Inspection
1.
Press the OFF switch more then 4 times within 2 seconds while pressing the MODE switch.
DisplayFail description00Normal50Cluster ionizer fault
* Diagnostic procedure refer to D ...