Removal |
1. |
Turn the ignition switch OFF and disconnect the negative (-) battery cable. |
2. |
Disconnect the accelerator position sensor connector (A). |
3. |
Remove the installation nuts (B) and bolt (C), and then remove the accelerator pedal module. |
Installation |
1. |
Installation is reverse of removal.
|
Daytime running light
Daytime Running Lights (DRL) can make it easier for others to see the front of
your vehicle during the day. DRL can be helpful in many different driving conditions,
and it is especially helpful afte ...
Heated Oxygen Sensor (HO2S) Specifications
Specification
[Bank 1 / sensor 2, Bank 2 / sensor 2]
A/F Ratio (?)Output Voltage(V)RICHMin. 0.8LEANMax. 0.1
ItemSpecificationHeater Resistance (?)3.3 ~ 4.1[20°C(68°F)]
[Bank 1 / sensor 1, ...
Components and Components Location
Component Location
1. Seat Memory Unit (IMS)2. IMS control switch3. IMS driver power seat control
...