Removal |
1. |
Remove the front seat assembly.
|
2. |
Remove the seat back cover and cushion cover.
|
3. |
Push up and then remove the ventilation duct (A) after loosening screws. |
4. |
Remove the air ventilation panel (A) and fixing clip (B) from seat cushion. |
5. |
Remove the climate blower and duct (A) after loosening the fixing clips and screws. |
6. |
Remove the climate control unit (A) after loosening the mounting screws. |
Installation |
1. |
Install the connectors and air ventilation control unit. |
2. |
Install the air ventilation duct and blower. |
3. |
Install the seat back cover. |
4. |
Install the seat assembly and seat track cover. |
Repair procedures
Adjustment
Glass Adjustment
•
Check the glass run channel for damage or deterioration, and replace them if necessary.
1.
Remove the front door trim.
(Refer to Front Door - "Front Door Tri ...
Rear Back Armrest Cup Holder Repair procedures
Replacement
•
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
•
Take care not to bend or scratch the trim and pan ...
Rear Upper Arm Repair procedures
Removal
1.
Remove the rear wheel & tire (A).
Tightening torque:
88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
Be careful not to damage to the hub bolts when ...