Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the crash pad lower panel.
|
3. |
Disconnect the 6P connector (B) of the coil antenna and then remove the coil antenna (A) after loosening the screw. |
Installation |
1. |
Install the coil antenna and connect the 6P connector. |
2. |
Install the crash pad lower panel. |
Parking Brake Pedal Assembly Repair procedures
Removal
1.
Turn ignition switch OFF and disconnect the negative (-) battery cable.
2.
Remove the crash pad lower panel.
(Refer to Body - "Crash pad lower panel")
3.
Remove the junction b ...
Line Pressure Control Solenoid Valve Repair procedures
Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the solenoid valve connector.
3.
Measure resistance between sensor signal terminal and sensor ground terminal.
4.
Check that the ...
Record your key number
The key code number is stamped on the key code tag attached to the key set. Should
you lose your keys, contact an authorized HYUNDAI dealer. Remove the key code tag
and store it in a safe place. A ...