Your mirror will automatically dim upon detecting glare from the vehicles traveling behind you. The autodimming function can be controlled by the Dimming ON/OFF button:
1. Pressing and holding the button for 3 seconds turns the autodimming function
OFF which is indicated by the green Status Indicator LED turning off.
2. Pressing and holding the button for 3 seconds again turns the auto-dimming function
ON which is indicated by the green Status Indicator LED turning on.
The mirror defaults to the ON position each time the vehicle is started.
Z-Nav™ Compass Display
The NVS™ Mirror in your vehicle is also equipped with a Z-Nav™ Compass that shows the vehicle Compass heading in the Display Window using the 8 basic cardinal headings (N, NE, E, SE, etc.).
Hood Latch Release Handle Components and Components Location
Component Location
1. Hood latch release handle
...
Instrument panel illumination
The instrument panel illumination intensity can be adjusted as follows:
Ignition switch in the ON position
Pushing the control switch up or down
The illumination intensity is shown on the ...
Alignment Repair procedures
Front Wheel Alignment
When using a commercially available computerized wheel
alignment equipment to inspect the front wheel alignment, always
position the vehicle on a lev ...