Removal |
|
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the crash pad center fascia panel (A). |
3. |
Remove the monitor (A) after loosening the mounting screws. |
4. |
Remove the AVN head unit (A) after loosening the mounting screws. |
5. |
Remove the AVN head unit connectors and cables.
|
1. |
Remove the center fascia panel.
(Refer to AVN System - "AVN Head Unit") |
2. |
Remove the monitor (A) after loosening the mounting screws. |
3. |
Remove the AVN monitor connectors and cables (A). |
Installation |
1. |
Connect the AVN head unit connectors and cable. |
2. |
Install the AVN head unit. |
3. |
Install the center fascia panel. |
4. |
Connet the battery (-) terminal.
|
1. |
Install the AVN monitor. |
2. |
Install the center fascia panel. |
Components and Components Location
Components
1. Rear window glass2. Rear window glass molding
...
Check spark plugs and ignition system
Inspect your spark plugs as described in section 7 and replace them if necessary.
Also check all ignition wiring and components to be sure they are not cracked, worn
or damaged in any way. ...
Driving in flooded areas
Avoid driving through flooded areas unless you are sure the water is no higher
than the bottom of the wheel hub. Drive through any water slowly. Allow adequate
stopping distance because brake perfor ...