Inspection |
1. |
The body control module can diagnose by using the GDS more quickly.
The BCM communicates with the GDS and then reads the input/output value and drives the actuator. |
2. |
To diagnose the SWRC function, select the menu of model and body control module |
3. |
To consult the present input/output value of SWRC, "Current DATA". |
Removal |
1. |
Remove the driver airbag module.
|
2. |
Remove the steering wheel.
|
3. |
Remove the steering wheel cover (A) after loosening the screws. |
4. |
Remove the steering wheel remote control switch connector (A).
[LH - AVN/Handsfree]
[RH - Cruise] |
5. |
Remove the steering wheel remote control switch (A) after loosening the mounting screws. |
Installation |
1. |
Reassemble the steering wheel remote control switch. |
2. |
Reassemble the steering wheel cover. |
3. |
Reassemble the steering wheel. |
4. |
Reassemble the steering wheel remote control switch and airbag connector.
|
5. |
Reassemble the driver airbag module. |
Schematic Diagrams
Circuit Diagram - ESC (1)
Circuit Diagram - ESC (2)
Circuit Diagram - ESC (3)
Circuit Diagram - ESC (4)
ESC connector input/output
Connector TerminalSpecificationPin NoDescription29IGNITION ...
Front Seat Belt Buckle Components and Components Location
Component Location
1. Front seat belt buckle
...
If you have a flat tire while driving
If a tire goes flat while you are driving:
1. Take your foot off the accelerator pedal and let the vehicle slow down while
driving straight ahead. Do not apply the brakes immediately or attempt to p ...