Hyundai Azera: Barometric Pressure Sensor (BPS) Repair procedures
Fifth generation HG (2011–2024) / Hyundai Azera 2011-2024 Service Manual / Engine Control/Fuel System / Engine Control System / Barometric Pressure Sensor (BPS) Repair procedures
Fifth generation HG (2011–2024) / Hyundai Azera 2011-2024 Service Manual / Engine Control/Fuel System / Engine Control System / Barometric Pressure Sensor (BPS) Repair procedures
| Inspection |
| 1. |
Connect the GDS on the Data Link Connector (DLC). |
| 2. |
Measure the output voltage of the BPS at idle and IG ON.
|
| Removal |
| 1. |
Turn the ignition switch OFF and disconnect the battery negative (-) cable. |
| 2. |
Disconnect the barometric pressure sensor connector (A). |
| 3. |
Remove the installation bolt (B), and then remove the sensor from the air cleaner assembly.
|
| Installation |
|
|
| 1. |
Installation is reverse of removal.
|
Barometric Pressure Sensor (BPS) Schematic Diagrams
Circuit Diagram
...
Intake Air Temperature Sensor (IATS) Description and Operation
Description
Intake Air Temperature Sensor (IATS) is included inside Barometric Pressure Sensor (BPS) and detects the intake air temperature.
To calculate precise air quantity, correction of the ai ...
See also:
Inhibitor Switch Specifications
Specifications
? Type: Combination of output signals from 4 terminals
Power supply (V)12Output typeCombination of output signals
Signal Code Table
PP-RRR-NNN-DDSignal 112V12V00000Signal 20 ...
Towing service
If emergency towing is necessary, we recommend having it done by an authorized
HYUNDAI dealer or a commercial tow-truck service. Proper lifting and towing procedures
are necessary to prevent damage ...
Front Door Window Glass Repair procedures
Replacement
1.
Remove the front door trim.
(Refer to Front Door - "Front Door Trim")
2.
Remove the front door window glass mounting hole plug (B).
•
Use the door swi ...
Categories
Hyundai Azera Manuals
© 2011-2024 Copyright www.hgmanual.com