Hyundai Azera: Barometric Pressure Sensor (BPS) Schematic Diagrams

Barometric Pressure Sensor (BPS) Specifications

Specification Pressure [kPa (kgf/cm?, psi)]Output Voltage (V)10.0 (0.01, 0.15)0.5055.0 (0.56, 7.98)2.21100.0 (1.01, 14.5)3.93115.0 (1.17, 16.9)4.50 ...

Barometric Pressure Sensor (BPS) Repair procedures

Inspection 1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the BPS at idle and IG ON. Specification: Refer to "Specification" Removal 1. Turn ...

See also:

Trailing Arm Repair procedures
Replacement 1. Remove the rear wheel & tire. Tightening torque: 88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)     • Be careful not to damage to the hub bolts ...

Vacuum crankcase ventilation hoses
Inspect the surface of hoses for evidence of heat and/or mechanical damage. Hard and brittle rubber, cracking, tears, cuts, abrasions, and excessive swelling indicate deterioration. Particular atten ...

Automatic heating and air conditioning
1. Push the AUTO button. The modes, fan speeds, air intake and air-conditioning will be controlled automatically by setting the temperature. 2. Set the temperature to the desired temperatur ...