Inspection |
1. |
Connect the battery voltage and check the blower motor rotation. |
2. |
If the blower motor voltage is not operated well, substitute with a known-good blower motor and check for proper operation. |
3. |
If the problem is corrected, replace the blower motor. |
Replacement |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the crash pad lower cover (A) and then disconnect the connector (B). |
3. |
Disconnect the of the blower motor connector(A) and then remove the blower motor (B). |
4. |
Installation is the reverse order of removal. |
Rear Upper Arm Repair procedures
Removal
1.
Remove the rear wheel & tire (A).
Tightening torque:
88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
Be careful not to damage to the hub bolts when ...
Front Stabilizer Bar Repair procedures
Replacement
1.
Remove the front wheel & tire (A).
Tightening torque:
88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
•
Be careful not to damage to the hub b ...
Components and Components Location
Component Location
1. Fuel filler door open switch2. Fuel filler door release actuator
...