Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the crash pad lower panel.
|
3. |
Remove the Reinforcing panel after loosening the mounting bolt and nut.
|
4. |
Disconnect the IPM connectors, loosening the nuts (4EA). |
5. |
Disconnect the rear connector, and then remove the IPM. |
Installation |
1. |
Install the IPM. |
2. |
Install the reinforcing panel. |
3. |
Install the crash pad lower panel. |
4. |
Disconnect the negative (-) battery terminal. |
IPM Diagnosis With GDS |
1. |
It will be able to diagnose defects of IPM with GDS quickly.
GDS can operates actuator forcefully, input/output value monitoring and
self diagnosis. |
2. |
Select model and "IPM". |
3. |
Select the module to check. |
4. |
Select "Input/output monitoring", if you will check current
data of body network system. It provides input/output status of each
module. |
5. |
If you will check each module data operation forcefully, select "Actuation test". |
6. |
To check the DTC of the each module, select "DIAGNOSTIC TROUBLE CODES". |
7. |
If you want to change user option, select “user option”. |
Front Door Window Glass Components and Components Location
Component Location
1. Front door window glass
...
Front Strut Assembly Components and Components Location
Components
1. Dust cover2. Upper locking nut3. Self locking nut4. Space5. Insulator6. Spring upper seat7. Spring upper pad8. Strut dust cover & Bumper rubber9. Coil spring10. Spring lower pad ...
Fuel filter
A clogged filter can limit the speed at which the vehicle may be driven, damage
the emission system and cause multiple issues such as hard starting. If an excessive
amount of foreign matter accumula ...