Hyundai Azera: Body Electrical System

Rear Seat Belt Buckle Repair procedures

Replacement 1. Remove the rear seat cushion assembly. (Refer to Rear Seat - "Rear Seat Assembly") 2. Loosen the mounting bolt, and then remove the rear seat belt buckle (A). [LH] Tighten ...

General Information

...

See also:

Front Impact Sensor (FIS) Description and Operation
Description The front impact sensor (FIS) is installed in the Front End Module (FEM). They are remote sensors that detect acceleration due to a collision at its mounting location. The primary p ...

Rearview camera (If equipped)
The rearview camera will activate when the back-up light is ON with the ignition switch ON and the shift lever in the R (Reverse) position. This system is a supplemental system that shows behind t ...

Cowl Top Cover Repair procedures
Replacement 1. Remove the cap (B) and remove the nuts, then remove the wiper arm (A). Tightening torque : 22.6~26.5 N.m(2.3~2.7 kgf.m, 16.6~19.5 lb-ft) 2. Disconnect the nozzle hose (B). ...