Removal |
1. |
Disconnect the brake fiuid level switch connector, and remove the reservoir cap. |
2. |
Remove the brake fluid from the master cylinder reservior with a syringe.
|
3. |
Remove the wheel & tire. |
4. |
Disconnect the brake tube by loosening the tube flare nut (B).
Front
Rear |
5. |
Remove the brake hose clip (A). |
6. |
Disconnect the brake hose from the brake caliper by loosening the bolt (A).
Front
Rear |
Inspection |
1. |
Check the brake tubes for cracks, crimps and corrosion. |
2. |
Check the brake hoses for cracks, damage and fluid leakage. |
3. |
Check the brake tube flare nuts for damage and fluid leakage. |
4. |
Check brake hose mounting bracket for crack or deformation. |
Installation |
1. |
Installation is the reverse of removal.
|
2. |
After installation, bleed the brake system.
(Refer to Brake system bleeding) |
3. |
Check the spilled brake oil. |
Specifications
Specifications
Purge Control Solenoid Valve (PCSV)
? Specification
ItemSpecificationCoil Resistance (?)22.0 ~ 26.0 [20°C(68°F)]
Fuel Tank Pressure Sensor (FTPS)
? Type: Piezo-Resistive Pr ...
Battery recharging
Your vehicle has a maintenance-free, calcium-based battery.
If the battery becomes discharged in a short time (because, for example,
the headlights or interior lights were left on while the vehi ...
Easy access function (if equipped)
With the shift lever in the P (Park) position, the system will move the driver's
seat and steering wheel automatically so you can comfortably enter and exit the
vehicle.
- The steering wheel wi ...