Hyundai Azera: Camshaft Position Sensor (CMPS) Description and Operation
Fifth generation HG (2011–2024) / Hyundai Azera 2011-2024 Service Manual / Engine Control/Fuel System / Engine Control System / Camshaft Position Sensor (CMPS) Description and Operation
Fifth generation HG (2011–2024) / Hyundai Azera 2011-2024 Service Manual / Engine Control/Fuel System / Engine Control System / Camshaft Position Sensor (CMPS) Description and Operation
| Description |
Camshaft Position Sensor (CMPS) is a hall sensor and detects the camshaft position by using a hall element.
It is related with Crankshaft Position Sensor (CKPS) and
detects the piston position of each cylinder which the CKPS can't
detect.
The two CMPS are installed on engine head cover of bank 1 and
2 respectively and uses a target wheel installed on the camshaft. The
Cam Position sensor is a hall-effect type sensor. As the target wheel
passes the Hall sensor, the magnetic field changes in the sensor. The
sensor then switches a signal which creates a square wave.
Crankshaft Position Sensor (CKPS) Repair procedures
Inspection
1.
Check the signal waveform of the CMPS and CKPS using the GDS.
Specification: Refer to “Wave Form”
Removal
1.
Turn the ignition switch OFF and disconnect the battery negat ...
Camshaft Position Sensor (CMPS) Specifications
Specification
ItemSpecificationOutput Voltage (V)High: 5.0VLow: 0.7VAir Gap (mm)0.5 ~ 1.5
...
See also:
Body Control Module (BCM) Schematic Diagrams
BCM Connector Terminals
BCM(IPM) Input Signal SPEC
Signal NameOn/Off JudgmentInput CharacteristicsInput acquisition VBAT Threshold VoltageL_DRLOpt(NA)On : 3.2V UnderOff : 4.2V OverPull up(ON ...
Severe driving conditions
A - Repeatedly driving short distance of less than 5 miles (8 km) in normal temperature
or less than 10 miles (16 km) in freezing temperature
B - Extensive engine idling
or low speed driving for l ...
ESCL(Electronic Steering Column Lock) Components and Components Location
Component
...
Categories
Hyundai Azera Manuals
© 2011-2024 Copyright www.hgmanual.com