Inspection |
1. |
Check the signal waveform of the CMPS and CKPS using the GDS.
|
Removal |
|
1. |
Turn the ignition switch OFF and disconnect the battery negative (-) cable. |
2. |
Disconnect the camshaft position sensor connector (A). |
3. |
Remove the installation bolt (B), and then vertically remove the sensor from the cylinder head.
[Bank 1/Intake]
[Bank 1/Exhaust]
[Bank 2/Intake]
[Bank 2/Exhaust] |
Installation |
|
|
|
|
1. |
Installation is reverse of removal.
|
Passive Occupant Detection System (PODS-F) Description and Operation
Description
In order to make normal activation of airbag system, SRSCM
detects DTC(s) for the Passive occupant detection system (PODS-F). If
the seat is occupied, PODS-F detects passenger prese ...
Specifications
Specification
Engine & T/MJoint typeMax. permissible angleInnerOuterOuterInnerRAMDA 3.0 MPI A/TBJ#104PTJ#10045°21°RAMDA 3.3 GDI A/TBJ#104PTJ#10045°21°
Tightening Torque
It ...