Hyundai Equus Manuals

Hyundai Azera: Canister Repair procedures - Evaporative Emission Control System - Emission Control System - Hyundai Azera 2011-2024 Service ManualHyundai Azera: Canister Repair procedures

Removal
1.
Turn the ignition switch OFF and disconnect the negative (-) battery cable.
2.
Disconnect the ventilation hose (A) from the fuel tank air filter.
3.
Disconnect the vapor tube quick-connector (B) and the quick-connector (C).

4.
Remove installation bolts (A) and then remove the canister assembly.

5.
Remove the bracket (A) from the canister after removing a bolts (B).

Inspection
1.
Check for the following items visually.
A.
Cracks or leakage of the canister
B.
Loose connection, distortion, or damage of the vapor hose/tube

A: Canister - Atmosphere
B: Canister - Fuel Tank
C: Canister - Intake Manifold
Installation
1.
Installation is reverse of removal.

Canister installation bolt :
3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~4.3 lb-ft)

Schematic Diagrams
Schematic Diagram Canister Canister is filled with charcoal and absorbs evaporated vapor in fuel tank. The gathered fuel vapor in canister is drawn into the intake manifold by the ECM/PCM when ...

On-board Refueling Vapor Recovery (ORVR) valve Description and Operation
Operation Normal status Full fuelVehicle Rollover / steepValve openValve closeValve close ...

See also:

Hands Free Switch Repair procedures
Removal 1. Disconnect the negative(-) battery terminal. 2. Remove the steering wheel. (Refer to Steering System - "Steering Column and Shaft") 3. Remove the cover (A) after loosening scre ...

Engine Oil Flow Diagram
Engine oil flow diagram ...

Ignition Coil Repair procedures
Removal and Installation [LH] 1. Disconnect the battery nagative terminal. 2. Remove the engine cover. 3. Disconnect the LH ignition coil connectors (A) and then remove the LH ignition ...

Categories

Hyundai Azera Manuals


© 2011-2024 Copyright www.hgmanual.com