Components Location |
1. Automatic transaxle 2. Transaxle Control Module (TCM) | 3. Shift lever 4. Date Linke Connector (DLC) |
1. Input speed sensor 2. Output speed sensor 3. Solenoid valve connect 4. Oil Temperature Sensor (OTS) | 5. Valve body assembly 6. Solenoid valve 7. Inhibitor switch |
Knock Sensor (KS) Repair procedures
Removal
[Knock Sensor #1 (Bank 1)]
1.
Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2.
Disconnect the knock sensor connector (A).
3.
Remove the intake man ...
Center Pillar Trim Repair procedures
Replacement
•
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
•
Take care not to bend or scratch the trim and pan ...
Parking brake
Applying the parking brake To engage the parking brake, first apply the
foot brake and then depress the parking brake pedal down as far as possible.
In addition it is recommended that when parking ...