Replacement |
|
1. |
Remove the main crash pad assembly.
(Refer to Crash Pad - "Main Crash Pad Assembly") |
2. |
Remove the cowl top cover.
(Refer to "Cowl Top Cover") |
3. |
Disconnect the blower unit connectors. |
4. |
Disconnect the multi box connectors (A).
[Driver's]
[Passenger's] |
5. |
Disconnect the passenger compartment junction box connectors. |
6. |
Disconnect the airbag control module (SRSCM) connectors (A). |
7. |
Disconnect the connector (A) and the mounting clips in the front pillar.
[Driver's]
[Passenger's] |
8. |
After loosening the mounting bolts and nuts, then remove the cowl cross bar assembly (A). |
9. |
Installation is the reverse of removal.
|
Front Hub - Axle Components and Components Location
Components
1. Coking nut2. Brake disc3. Hub4. Dust cover5. Knuckle6. Wheel bearing7. Snap ring8. Drive shaft
...
Power Window Motor Schematic Diagrams
Circuit Diagram
Front Safety Window
Rear Window
...
Waist Line Molding Repair procedures
Replacement
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related parts, to
prevent damage.
•
Put ...