Replacement |
1. |
Remove the cap (B) and remove the nuts, then remove the wiper arm (A).
|
2. |
Disconnect the nozzle hose (B). |
3. |
Detach the clips, then remove the cowl top cover (A). |
4. |
Installation is the reverse of removal.
|
Manifold Absolute Pressure Sensor (MAPS) Specifications
Specification
Pressure [kPa (kgf/cm?, psi)]Output Voltage (V)20.0 (0.20, 2.90)0.7946.66 (0.47, 6.77)1.84101.32 (1.03, 14.7)4.0
...
Mode Control Actuator Repair procedures
Inspection
1.
Ignition "OFF”
2.
Disconnect the connector of mode control actuator.
3.
Verify that the mode control actuator operates to the defrost
mode when connecting 12V to the termin ...
Heater Core Repair procedures
Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Recover the refrigerant with a recovery/ recycling/ charging station.
3.
When the engine is cool, drain the engine coola ...