Hyundai Equus Manuals

Hyundai Azera: Crash Pad Lower Panel Repair procedures - Crash Pad - Body (Interior and Exterior) - Hyundai Azera 2011-2024 Service ManualHyundai Azera: Crash Pad Lower Panel Repair procedures

Fifth generation HG (2011–2024) / Hyundai Azera 2011-2024 Service Manual / Body (Interior and Exterior) / Crash Pad / Crash Pad Lower Panel Repair procedures

Replacement
   
•
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
•
Take care not to scratch the body surface.
•
Put on gloves to protect your hands.
1.
Using a screwdriver or remover, remove the crash pad side cover (A).

2.
Using a screwdriver or remover, remove the fuse box cover (A).

3.
After loosening the mounting screws, then remove the crash pad lower panel (A).

4.
Disconnect the diagnosis connector (A) and connector (B).

5.
Installation is the reverse of removal.
   
•
Make sure the connector are connected in properly.
•
Replace any damaged clips.
Crash Pad Lower Panel Components and Components Location
Component Location 1. Crash pad lower panel ...

Glove Box Housing Components and Components Location
Component Location 1. Glove box housing ...

See also:

Engine Coolant Temperature Sensor (ECTS) Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the ECTS connector. 3. Remove the ECTS (Refer to "Removal"). 4. After immersing the thermistor of the sensor into engine coola ...

Rear seat
Headrest The rear seat is equipped with headrests for the occupant's safety and comfort. The headrest not only provides comfort for passengers, but also helps to protect the head and neck i ...

Side Airbag (SAB) Module Components and Components Location
Components ...

Categories

Hyundai Azera Manuals


© 2011-2024 Copyright www.hgmanual.com