Hyundai Azera: Crash Pad Side Cover Repair procedures

Fifth generation HG (2011–2024) / Hyundai Azera 2011-2024 Service Manual / Body (Interior and Exterior) / Crash Pad / Crash Pad Side Cover Repair procedures

Replacement

•	When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.

•	Take care not to scratch the body surface.

•	Put on gloves to protect your hands.

1.	Using a screwdriver or remover, remove the crash pad side cover (A). [LH] [RH]

2.

Installation is the reverse of removal.

•	Replace any damaged clips.

Crash Pad Side Cover Components and Components Location

Component Location [LH] 1. Crash pad side cover [LH] [RH] 1. Crash pad side cover [RH] ...

Main Crash Pad Assembly Components and Components Location

Component Location 1. Main crash pad assembly ...

See also:

GAWR (Gross axle weight rating)
This is the maximum allowable weight that can be carried by a single axle (front or rear). These numbers are shown on the certification label. The total load on each axle must never exceed its GAWR. ...

Before entering vehicle
Be sure that all windows, outside mirror(s), and outside lights are clean. Check the condition of the tires. Check under the vehicle for any sign of leaks. Be sure there are no obstacles behi ...

Refrigerant label (If equipped)
The refrigerant label is located on the underside of the hood. The label contains the following information: Type of refrigerant Amount of refrigerant ...

Categories

Hyundai Azera Manuals

© 2011-2024 Copyright www.hgmanual.com