Removal and Installation |
1. |
Disconnect the battery negative terminal.
|
2. |
Remove the steering wheel.
|
3. |
Loosen the screws and then remove the cover (A). |
4. |
Disconnect the steering wheel remote control switch connectors (A). |
5. |
Loosen the screw and then remove the steering wheel remote control switch assembly (A), being cautions of fixed clip. |
6. |
Remove the smart cruise control switch (A). |
7. |
Installation is the reverse of removal. |
Engine And Transmission Assembly Repair procedures
Removal
•
Use fender covers to avoid damaging painted surfaces.
•
To avoid damage, unplug the wiring connectors carefully while holding the connector portion.
...
Digital clock (if equipped)
WARNING
Do not adjust the clock while driving. You may lose your steering control
and cause an accident that results in severe personal injury or death.
Whenever the battery terminals or relate ...
Heated Steering wheel Schematic Diagrams
System Circuit Diagram
Terminal Function
HousingPinFunctionWire colorPadAGNDBackBHEATERYellowCNTC+Back / YellowDNTC-BackRemotecontrolAGNDBackBBATRedCLEDGreenDSWITCHWhite
...