Hyundai Equus Manuals

Hyundai Azera: Cylinder Block Components and Components Location - Cylinder Block - Engine Mechanical System - Hyundai Azera 2011-2024 Service ManualHyundai Azera: Cylinder Block Components and Components Location

Components

1. Piston ring
2. Piston
3. Connecting rod
4. Connecting rod upper bearing
5. Piston pin
6. Connecting rod lower bearing
7. Connecting rod bearing cap
8. Baffle plate
9. Upper oil pan
10. Cylinder block
11. Snap ring
12. Water jacket separator

1. Oil drain cover
2. Oil drain cover gasket
3. Crank shaft upper bearing
4. Thrust bearing
5. Adapter plate
6. Drive plate
7. Rear oil seal
8. Rear oil seal case
9. Crankshaft
10. Crankshaft lower bearing
11. Main bearing cap
12. Oil cover
13. Oil cover gasket

Rear Oil Seal Repair procedures
Removal 1. Remove the drive plate. (Refer to Cylinder Block - "Drive Plate") 2. Remove the rear oil seal (A). Installation 1. Using SST(09231-3C200, 09231-H1100), install the rear oil s ...

Cylinder Block Repair procedures
Disassembly     • Use fender covers to avoid damaging painted surfaces. • To avoid damage, unplug the wiring connectors carefully while holding the connector portion. ...

See also:

Variable Intake Solenoid (VIS) Valve Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the VIS valve connector. 3. Measure resistance between the VIS valve terminals 1 and 2. 4. Check that the resistance is within ...

Passenger Airbag (PAB) Module Description and Operation
Description Passenger Airbag (PAB) module is located in the passenger crash pad. This PAB contains 2 firing squibs of airbag and 1 firing squib of active vent. Depending of crash speed or the t ...

Rear seat
Headrest The rear seat is equipped with headrests for the occupant's safety and comfort. The headrest not only provides comfort for passengers, but also helps to protect the head and neck i ...

Categories

Hyundai Azera Manuals


© 2011-2024 Copyright www.hgmanual.com