Removal |
In case of removing the high pressure fuel pump, high
pressure fuel pipe, delivery pipe, and injector, there may be injury
caused by leakage of the high pressure fuel. So don’t do any repair
work right after engine stops.
|
1. |
Turn the ignition switch OFF and disconnect the battery negative (-) cable. |
2. |
Release the residual pressure in fuel line.
(Refer to Fuel Delivery System - “Release Residual Pressure in Fuel Line”)
|
3. |
Disconnect the injectors & rail pressure sensor connector (A). |
4. |
Remove the intake manifold.
|
5. |
Remove the injector foam (A). |
6. |
Remove the high pressure fuel pipe.
|
7. |
Remove the installation bolt (A), and then remove the delivery pipe and injector assembly from the engine. |
Installation |
|
|
|
|
|
1. |
Installation is reverse of removal.
|
Specifications
Specification
Smart Key Unit
ItemsSpecificationRated voltageDC 12VOperating voltageDC 9 ~ 16VOperating temperature-30°C ~ 80°C (-22°F ~ 176°F)LoadMax. 6mA
Smart Key FOB
ItemsSpecificationBatte ...
Components and Components Location
Components
1. Rear window glass2. Rear window glass molding
...
Sunglass holder
To open the sunglass holder, press the cover and the holder will slowly open.
Place your sunglasses in the compartment door with the lenses facing out. Push to
close.
WARNING - Sunglass holder
...