Hyundai Azera: Description and Operation
Fifth generation HG (2011–2024) / Hyundai Azera 2011-2024 Service Manual / Engine Electrical System / Starting System / Description and Operation
Fifth generation HG (2011–2024) / Hyundai Azera 2011-2024 Service Manual / Engine Electrical System / Starting System / Description and Operation
| Description |
The starting system includes the battery, starter, solenoid
switch, ignition switch, inhibitor switch (A/T), clutch pedal switch
(M/T), ignition lock switch, connection wires and the battery cable.
When the ignition key is turned to the start position, current flows and energizes the starter motor's solenoid coil.
The solenoid plunger and clutch shift lever are activated, and the clutch pinion engages the ring gear.
The contacts close and the starter motor cranks. In order to
prevent damage caused by excessive rotation of the starter armature when
the engine starts, the clutch pinion gear overruns.
| A. Solenoid B. Brush assembly C. Armature D. Overrun clutch |
Starting System
...
Repair procedures
Starter Circuit Troubleshooting
The battery must be in good condition and fully charged.
1.
Disconnect the injector connectors.
2.
With the shift lever in N or P (A/T) ...
See also:
Components and Components Location
Components
1. Driver Airbag (DAB)2. Steering Wheel3. Clock Spring4. Passenger Airbag (PAB)5. Side Airbag (SAB)6. Curtain Airbag (CAB)7. Knee Airbag (KAB)8. Seat Belt Pretensioner (BPT)9. Front Im ...
Power Seat Control Switch Schematic Diagrams
Circuit Diagram
...
Steering Angle Sensor Description and Operation
Description
The Steering Angle Sensor (SAS) is installed in MDPS (Motor
Driven Power Steering) and it sends messages to HECU through CAN
communication line.
The SAS is used to determine turnin ...
Categories
Hyundai Azera Manuals
© 2011-2024 Copyright www.hgmanual.com