WARNING
Do not adjust the clock while driving. You may lose your steering control and cause an accident that results in severe personal injury or death.
Whenever the battery terminals or related fuses are disconnected, you must reset the time.
When the ENGINE START/STOP button is in the ACC or ON position, the clock buttons operate as follows:
Hour (1)
Pressing the H button will advance the time display by one hour.
Minute (2)
Pressing the M button will advance the time display by one minute.
Display conversion
To change the 12 hour format to the 24 hour format, press the “H” and “M” buttons at the same time for more than 5 seconds.
For example, if the time is 10:15 p.m., the display will be changed to 22:15.
❈For the type of clock built in the audio or navigation, refer to a separately supplied manual.
Tire sidewall labeling
This information identifies and describes the fundamental characteristics of
the tire and also provides the tire identification number (TIN) for safety standard
certification. The TIN can be used ...
Camshaft Position Sensor (CMPS) Description and Operation
Description
Camshaft Position Sensor (CMPS) is a hall sensor and detects the camshaft position by using a hall element.
It is related with Crankshaft Position Sensor (CKPS) and
detects the pisto ...
Glove box
The glove box can be locked and unlocked with the mechanical key (1).
To open the glove box, push the button (2) and the glove box will automatically
open. Close the glove box after use.
WARNIN ...