Replacement |
|
1. |
Using a screwdriver or remover, remove the front door scuff tirm (A).
[Front] |
2. |
Disconnect the connector (A). |
3. |
Remove the rear seat cushion assembly.
(Refer to Rear Seat - "Rear Seat Assembly") |
4. |
After loosening the mounting screw, then remove the rear door scuff trim (A).
[Rear] |
5. |
Disconnect the connector (A). |
6. |
Installation is the reverse of removal.
|
Disconnecting a Device
Press the key
Select [Phone]
Select [Paired Phone List]
From the paired phone list, select the currently connected device and select
the button.
...
Special Service Tools
Special Service Tools
ItemIllustrationApplicationFuel Pressure Gauge(09353-24100)Measuring the fuel line pressureFuel Pressure Gauge Adapter(09353-02100)Connection between the high pressure fuel ...
Side Impact Sensor (SIS) Description and Operation
Description
Side Impact Sensor (SIS) system consists of two Pressure Side
Impact Sensor (P-SIS) which are installed at each center of the front
door module (LH and RH) and two SIS which are ins ...