Removal and Installation |
1. |
Remove the drive belt idler.
(Refer to Timing System - "Idler") |
2. |
Remove the drive belt auto tensioner (A).
|
3. |
Installation is reverse order of removal |
Rear Oil Seal Repair procedures
Removal
1.
Remove the drive plate.
(Refer to Cylinder Block - "Drive Plate")
2.
Remove the rear oil seal (A).
Installation
1.
Using SST(09231-3C200, 09231-H1100), install the rear oil s ...
Checking the brake fluid level
Check the fluid level in the reservoir periodically. The fluid level should be
between MAX (Maximum) and MIN (Minimum) marks on the side of the reservoir.
Before removing the reservoir cap and addin ...
Air Ventilation Seat Repair procedures
Removal
[Front Seat]
1.
Remove the front seat assembly.
(Refer to Body - "Front Seat Assembly")
2.
Remove the seat back cover and cushion cover.
(Refer to Body - "Front Seat Cushion Cover") ...