Hyundai Azera: Engine Hanger Components and Components Location

Engine And Transmission Assembly Repair procedures

Removal     • Use fender covers to avoid damaging painted surfaces. • To avoid damage, unplug the wiring connectors carefully while holding the connector portion. ...

Engine Hanger Repair procedures

Removal and Installation [Front engine hanger] 1. Remove the front engine hanger (A) Tightening torque: 44.1 ~ 53.6N.m (4.5 ~ 5.5kgf.m, 32.5 ~ 39.8lb-ft) 2. Install in the reverse ord ...

See also:

Alternator Repair procedures
Removal and Installation 1. Disconnect the battery negative terminal. 2. Remove the engine cover. 3. Disconnect the alternator connector (A) and the cable (B) from the 'B' terminal. 4 ...

Components and Components Location
Component Location 1. Driver power window main switch2. Passenger power window switch3. Front window motor4. Rear window motor5. Rear window switch ...

2. Evaporative emission control (including ORVR: Onboard Refueling Vapor Recovery) system
The Evaporative Emission Control System is designed to prevent fuel vapors from escaping into the atmosphere. (The ORVR system is designed to allow the vapors from the fuel tank to be loaded into a ...