Hyundai Azera: Engine Hanger Repair procedures

Fifth generation HG (2011–2024) / Hyundai Azera 2011-2024 Service Manual / Engine Mechanical System / Engine And Transmission Assembly / Engine Hanger Repair procedures

Removal and Installation

[Front engine hanger]

1.

Remove the front engine hanger (A)

Tightening torque:

44.1 ~ 53.6N.m (4.5 ~ 5.5kgf.m, 32.5 ~ 39.8lb-ft)

2.	Install in the reverse order of removal.

[Rear engine hanger]

1.

Remove the rear engine hanger (A)

Tightening torque:

18.6 ~ 23.5N.m (1.9 ~ 2.4kgf.m, 13.7 ~ 17.4lb-ft)

2.	Install in the reverse order of removal.

Engine Hanger Components and Components Location

Components Location ...

Timing System

...

See also:

Heated Oxygen Sensor (HO2S) Specifications
Specification [Bank 1 / sensor 2, Bank 2 / sensor 2] A/F Ratio (?)Output Voltage(V)RICHMin. 0.8LEANMax. 0.1 ItemSpecificationHeater Resistance (?)3.3 ~ 4.1[20°C(68°F)] [Bank 1 / sensor 1, ...

Dynamic Damper Components and Components Location
Components 1. BJ assembly2. Circlip3. BJ boot band4. BJ boot 5. Dynamic damper band6. Dynamic damper7. Shaft8. TJ boot band 9. TJ boot10. Spider assembly11. Snap ring12. TJ case 13. Circlip ...

Thermostat Troubleshooting
Troubleshooting SymptomsPossible CausesRemedyCoolant leakage • From the thermostat gasket Check the mounting bolts • Check the torque of the mounting bolts • Retighten the bolts an ...

Categories

Hyundai Azera Manuals

© 2011-2024 Copyright www.hgmanual.com