Hyundai Azera: Engine Room Under Cover Components and Components Location

Engine Cover Repair procedures

Removal and Installation 1. Remove the engine cover (A).     • Lift up the lower end of engine cover, then left and right alternately. • When installing, confirm th ...

Engine Room Under Cover Repair procedures

Removal and Installation 1. Remove the engine room under cover (A) and (B). Tightening torque: 7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)     • When removing t ...

See also:

Rear Door Module Repair procedures
Replacement 1. Remove the rear door window glass. (Refer to Rear Door - "Rear Door Window Glass") 2. Remove the rear door outside handle. (Refer to Rear Door - "Rear Door Outside Handle") ...

Side Body Body Repair
Side Body A Front side member tooling hole (O20)Fender apron upper member tooling hole (O10) Front door upper hinge mounting hole(O13) Front door lower hinge mounting hole (O13) Rear door upper h ...

Recommended SAE viscosity number
Always be sure to clean the area around any filler plug, drain plug, or dipstick before checking or draining any lubricant. This is especially important in dusty or sandy areas and when the vehicle ...