Inspection |
1. |
Ignition "OFF". |
2. |
Disconnect evaporator temperature sensor. |
3. |
Using the multi-tester, Measure resistance between terminal "1" and "2" of evaporator temperature sensor.
Specification
|
Replacement |
1. |
Remove the console extension cover (A). |
2. |
Remove the crash pad lower cover (A) and then disconnect the connector (B). |
3. |
Remove the cooling hose. |
4. |
Disconnect the evaporator temp connector (A). |
5. |
Remove the evaporator temperature sensor (A), by pulling it after rotating 90° in a counterclockwise direction. |
6. |
Installation is the reverse order of removal. |
SS-B Solenoid Valve(ON/OFF) Description and Operation
Description
SS-B solenoid valve is attached to the valve body and is an
on/off solenoid valve that is used to change gears. SS-B Solenoid
valve(ON/OFF) is installed at valve body. ...
Rear Oil Seal Components and Components Location
Components
1. Rear oil seal2. Oil seal case
...
IMS Power Seat Control Repair procedures
Inspection
1.
It will be able to diagnose defects of IMS with GDS quickly.
GDS can operates actuator forcefully, input/output value monitoring and
self diagnosis.
2.
Select model and "IPM ...