Removal |
1. |
Lift the vehicle. |
2. |
Disconnect the fuel filler hose (A). |
3. |
Disconnect the ventilation hose (B) from the fuel tank air filter. |
4. |
Open the fuel filler door and then remove the filler-neck installation screw (A). |
5. |
Remove the rear-LH wheel, tire, and the inner wheel house (A). |
6. |
Remove the filler-neck assembly from the vehicle after removing the bracket installation bolt (A). |
Installation |
1. |
Installation is reverse of removal.
|
Knee Airbag (KAB) Module Description and Operation
Description
The Knee Airbag (KAB) is installed inside the crash pad lower
panel and protects the driver in the event of a frontal crash. The
SRSCM determines if and when to deploy the KAB.
...
Fuel Filler Cap Description and Operation
Description
A ratchet tightening device on the threaded fuel filler cap
reduces the chances of incorrect installation, which would seal the fuel
filler. After the gasket on the fuel filler cap ...
Under Body Body Repair
Projected Dimensions
Front side member tooling hole (O25) Side cover mounting hole (O9) Side cover mounting hole (O9) Front subframe mounting boltFront subframe mounting hole (O18) Front subfram ...