Replacement |
1. |
Remove the front door trim.
(Refer to Front Door - "Front Door Trim") |
2. |
After loosening the mounting screws, then remove the front door inside handle (A). |
3. |
Installation is the reverse of removal.
|
Transaxle Oil Temperature Sensor Repair procedures
Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the solenoid valve connector.
3.
Measure resistance between sensor signal terminal and sensor ground terminal.
4.
Check that the ...
Repair procedures
Replacement
[Removal]
•
Put on gloves to protect your hands.
•
Use seat covers to avoid damaging any surfaces.
1.
Remove the roof side molding.
(Refer to Bod ...
Power Window Switch Repair procedures
Inspection
Driver Power Window Switch
1.
When checking the driver power window switch, select a vehicle type and "IPM" menu.
2.
Select "DDM (Driver Door Module)".
3.
Select option "Input/ ...