Hyundai Azera: Front Door Latch Components and Components Location

Front Door Outside Handle Repair procedures

Replacement 1. Remove the hole plug (B). 2. After loosening the mounting bolt, then remove the front door outside handle cover (A). Tightening torque : 0.7 ~ 0.5 N.m (0.07 ~ 0.1 kgf.m, 1.0 ...

Front Door Latch Repair procedures

Replacement 1. Remove the front door module. (Refer to Front Door - "Front Door Module") 2. Disconnect the connector (A) and front door latch wiring harness. 3. Remove the front door latc ...

See also:

Rear Upper Arm Repair procedures
Removal 1. Remove the rear wheel & tire (A). Tightening torque: 88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)     Be careful not to damage to the hub bolts when ...

Rear Oil Seal Repair procedures
Removal 1. Remove the drive plate. (Refer to Cylinder Block - "Drive Plate") 2. Remove the rear oil seal (A). Installation 1. Using SST(09231-3C200, 09231-H1100), install the rear oil s ...

Front Wheel Speed Sensor Components and Components Location
Components 1. Front wheel speed sensor2. Front wheel speed sensor connector ...