Replacement |
1. |
Remove the hole plug (B). |
2. |
After loosening the mounting bolt, then remove the front door outside handle cover (A).
|
3. |
Remove the front door outside handle (A) by sliding it rearward. |
4. |
Disconnect the front door outside handle connector (A). |
5. |
Installation is the reverse of removal.
|
Front Door Inside Handle Repair procedures
Replacement
1.
Remove the front door trim.
(Refer to Front Door - "Front Door Trim")
2.
After loosening the mounting screws, then remove the front door inside handle (A).
3.
Installation ...
Opening the hood
Open the hood after turning off the engine on a flat surface, move the shift
lever to the P(Park) position and set the parking brake.
1. Pull the release lever to unlatch the hood. The hood shou ...
Trunk room lamp
The trunk room lamp comes on for 20 minutes when the trunk is opened. ...