Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the front bumper.
|
3. |
Disconnect the front fog lamp connector. |
4. |
Replace the front fog bulb (A) turning it in the counterclockwise direction. |
5. |
Remove the front fog lamp (A) after removing the screws (4EA). |
Installation |
1. |
Install the front fog bulb. |
2. |
Reconnect the lamp connector. |
3. |
Install the front wheel housing. |
Inspection |
1. |
Check BCM input/output specification of MFSW using the GDS.
(Refer to Multifunction switch - "Multifunction switch") |
Fuel Filler Door Open Switch Repair procedures
Inspection
1.
Open the junction box fuse cover.
2.
Insert the hand to the junction box fuse cover hole and remove the crash pad side switch assembly (A) by pushing it.
P ...
Specifications
Specification
Engine & T/MJoint typeMax. permissible angleInnerOuterOuterInnerRAMDA 3.0 MPI A/TBJ#104PTJ#10045°21°RAMDA 3.3 GDI A/TBJ#104PTJ#10045°21°
Tightening Torque
It ...
Description and Operation
Description
system outline
An optimal seat position set by a driver can be memorized in
Power seat unit by IMS SW, which enables restoration of seat position
set by the driver despite
Playi ...