Replacement |
1. |
Loosen the wheel lug nuts slightly.
Raise the vehicle, and make sure it is securely supported. |
2. |
Remove the front wheel and tire(A) from front hub.
|
3. |
Loosen the wheel speed sensor mount bolt and then remove the wheel speed sensor(A) from the knuckle.
|
4. |
Remove the brake caliper mounting bolts , and then place the brake caliper assembly(A) with wire.
|
5. |
Remove the tie rod end ball joint(A) from the knuckle.
|
6. |
Remove driveshaft coking nut(A) from the front hub under applying the brake.
|
7. |
Remove the lower arm(A) from the knuckle.
|
8. |
Disconnect the driveshaft(A) from the front hub assembly.
|
9. |
Loosen the strut bolts and nuts and then remove the kunckle assembly(A).
|
Disassembly |
1. |
Remove the snap ring(A). |
2. |
Remove the hub assembly from the knuckle assembly.
|
3. |
Remove the hub bearing inner race from the hub assembly.
|
4. |
Remove the hub bearing outer race from the knuckle assembly.
|
5. |
Replace hub bearing with a new one.
|
Reassembly |
1. |
Install the hub bearing to the knuckle assembly.
|
2. |
Install the hub assembly to the knuckle assembly.
|
3. |
Install the snap ring(A). |
Inspection |
1. |
Check the hub for cracks and the splines for wear. |
2. |
Check the brake disc for scoring and damage. |
3. |
Check the knuckle for cracks. |
4. |
Check the bearing for cracks or damage. |
Installation |
1. |
Install in the reverse order of removal.
|
Inside Rear View Mirror Components and Components Location
Component Location
1. Inside rear view mirror
...
Radiator Hose Components and Components Location
Components
1. Radiator upper hose2. Radiator lower hose3. Hose clip4. Clamp
...
Hood Assembly Repair procedures
Replacement
•
When removing and installing the hood, an assistant is necessary.
•
Be careful not to damage the hood and body.
•
When removing the clips, use a c ...